Intel D845EBG2 Computer Hardware User Manual


 
Intel Desktop Boards D845EPT2 and D845EBG2 Product Guide
58
Boot Device Priority Submenu
Maintenance Main Advanced Security Power Boot Exit
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
The submenu represented in Table 24 is for setting boot devices priority.
Table 24. Boot Device Priority Submenu
Feature
Options Description
1
st
Boot Device
2
nd
Boot Device
3
rd
Boot Device
4
th
Boot Device
(Note 1)
Removable Device
Hard Drive
ATAPI CD-ROM
Intel
®
UNDI, PXE
Disabled
Specifies the boot sequence from the available types of boot
devices. To specify boot sequence:
1. Select the boot device with <> or <>.
2. Press <Enter> to set the selection as the intended boot device.
The operating system assigns a drive letter to each boot device in
the order listed. Changing the order of the devices changes the
drive lettering. The default settings for the first through final boot
devices are, respectively listed below. The BIOS supports up to
sixteen total boot devices in any combination of the boot device
types below, with respect to these maximums per type.
Removable Device (maximum of four)
Hard Drive (maximum of 12)
ATAPI CD-ROM (maximum of four)
Intel UNDI, PXE (maximum of five)
(Note 2)
The boot devices appear in order by type. For example, assume that
the default boot order is preserved and that seven boot devices of
the following types are installed on the system: two removable
devices, two hard drives, two ATAPI CD-ROMs, and an Intel UNDI
(Universal Network Device Interface), PXE device. Both removable
devices would appear as the first and second boot devices, the two
hard drives would appear as the third and fourth, the two ATAPI
CD-ROM drives would appear as the fifth and sixth, and the Intel
UNDI, PXE device would appear as the seventh boot device.
Notes:
1. After the predefined boot device types (removable devices, hard drives, and ATAPI CD-ROM drives), the entries in this
list will reflect as many boot entry vector (BEV) boot devices (for example, Intel UNDI, PXE devices) and SCSI
CD-ROM drives as are installed, up to the five BEV boot devices supported by the BIOS.
2. While the predefined boot device types are individually listed in submenus by type, the BEV devices and SCSI
CD-ROM drives are all listed at this level.