Filter
Top Products
Installing and Replacing Desktop Board Components
23
Installing and Removing the Desktop Board
Refer to your chassis manual for instructions on installing and removing the Intel desktop board.
WARNING
This procedure should be done only by qualified technical personnel. Disconnect the computer
from its power source before performing the procedures described here. Failure to disconnect
the power before you open the computer can result in personal injury or equipment damage.
✏
NOTES
You will need a Phillips
†
(#2 bit) screwdriver.
Refer to Appendix B for regulatory requirements and installation instructions and precautions.
Figure 5 shows the location of the eight mounting holes for Desktop Board D845GBV. Desktop
Board D845GRG has six mounting holes.
OM13593
Figure 5. Desktop Board D845GBV Mounting Holes