Filter
Top Products
Intel Desktop Board D845PEMY Product Guide
36
Connecting Fans
See Figure 10 for fan header locations. Connect the processor’s fan heatsink cable to the processor
fan header on the board. Connect the chassis fan cable to the board fan header.
Connecting Power Cables
CAUTION
Failure to use an ATX12V power supply, or not connecting the 12 V processor core voltage power
supply connector to the desktop board may result in damage to the desktop board and/or power
supply.
Figure 10 shows the location of the power connectors.
1. Observe the precautions in “Before You Begin” on page 21.
2. Connect the 12 V processor core voltage power supply cable to the 2x2 connector.
3. Connect the main power supply cable to the 2x10 connector.
Connecting the Chassis Intrusion Cable
Connect the chassis intrusion cable to the header shown in Figure 10.