Filter
Top Products
Using the BIOS Setup Program
75
Removable Devices Submenu
Main Advanced Security Power Boot Exit
1
st
Drive [1
st
FLOPPY DRIVE]
Specifies the boot
sequence from the
available devices. Select
the boot device with
UpArrow or DownArrow key.
Press Enter to set the
selections as the intended
boot device. ARMD = ATAPI
Removable Media Device.
Select Screen
Select Item
Enter
Select
Sub-Menu
F1
General Help
P9
Setup Defaults
F10
Save and Exit
ESC
Exit
The submenu in shown Table 31 is for setting removable devices.
Table 31. Removable Devices Submenu
Feature Options Description
1
st
Removable Device
(Note)
Dependent on installed
removable devices
Specifies the boot sequence from the available
removable devices. To specify boot sequence:
1. Select the boot device with <> or <>.
2. Press <Enter> to set the selection as the
intended boot device.
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will
display up to four removable devices, the maximum number of removable devices supported by the BIOS.