Intel Desktop Board D925XCV/D925XBC Technical Product Specification
Table 16. PCI Interrupt Routing Map
ICH6-R PIRQ Signal Name
PCI Interrupt Source
PIRQA PIRQB PIRQC PIRQD PIRQE PIRQF PIRQG PIRQH
IEEE-1394a controller INTA
PCI bus connector 1 INTD INTA INTB INTC
PCI bus connector 2 INTC INTB INTA INTD
PCI bus connector 3
(Note)
INTD INTC INTA INTB
PCI bus connector 4
(Note)
INTB INTA INTC INTD
Note: Not present on the D925XBC.
✏
NOTE
In PIC mode, the ICH6-R can connect each PIRQ line internally to one of the IRQ signals (3, 4, 5,
6, 7, 9, 10, 11, 12, 14, and 15). Typically, a device that does not share a PIRQ line will have a
unique interrupt. However, in certain interrupt-constrained situations, it is possible for two or
more of the PIRQ lines to be connected to the same IRQ signal. Refer to Table 15 for the
allocation of PIRQ lines to IRQ signals in APIC mode.
PCI interrupt assignments to the USB ports, Serial ATA ports, and PCI Express ports are dynamic.
62