Filter
Top Products
10 DBPXA250 and DBPXA210 Development Platforms Specification Update
Summary of Changes
Note: Fixed refers to latest revision of the board and does not refer to earlier revisions. Some ECOs have
specific Intel
®
PXA250 and PXA210 applications processors stepping requirements.
Summary of BBPXA2xx Development Baseboard ECOs
ECO NO. Rev A Rev B
Refer
to:
Status ECO Description
1-9 These errata apply to a previously released stepping.
10 XX12 Fixed “UCB1400 Generates Interrupts Incorrectly”
11 XX12 Fixed
“USB Cable Attach/Detach Detection Interrupt Is
Constantly Asserted”
12 X X 13 No Fix “100-MHz SDRAM Failure”
13 There is no ECO 13.
14 X 13 Fixed “LCD Touch Screen Intermittently Fails”
15 X 15 Fixed
“New Philips UCB1400 Audio Codec on BBPXA2xx
Development Baseboard Requires Software
Change”
16 XX15 No Fix “Conditional ECO To Use 3.3-V PCMCIA Cards”
17 XX15 No Fix “Conditional ECO To Use The Expansion Port J26”
18 XX15 No Fix “Conditional ECO For USB “Soft Connect” Support”
Summary of DCPXA250 Processor Card ECOs
ECO NO. Rev C Rev D
Refer
to:
Status ECO Description
1-2 These errata apply to a previously released stepping.
3 X 16 Fixed
“VCC_PLL And VCC_CORE Pin Voltage Must Be
Equal”
4-5 These errata apply to a previously released stepping.
6 X Fixed “50-MHz SDRAM Requires 0-ohm Resistors”
7 X X 17 Fixed “For ARM* Multi-ICE* JTAG Use”
8 X 18 Fixed “Excessive Oscillator Output Voltage to PEXTAL Pin”
9 X X 19 Fixed “Coin Cell Battery Issue”
10 X X 19 Plan Fix “Signal Integrity Problems On SDCLK”
11-12 These errata apply to a previously released stepping.
13 X X 20 Plan Fix “VCC Core Voltage Change”
Summary of DCPXA210 Processor Card ECOs (Sheet 1 of 2)
ECO NO. Rev A Refer to: Status ECO Description
1 X 21 No Fix “For Multi-ICE JTAG Use”
2 X 21 No Fix “MMC MMCLK Support”