Filter
Top Products
22 DBPXA250 and DBPXA210 Development Platforms Specification Update
Intel
®
DCPXA210 Processor Card
4. Remove Coin Cell Battery
Problem: Specification change to BATT_VCC. Discontinue to use the backup battery and connect
BATT_VCC to VCCQ.
Implication: VCCQ could attempt to charge battery if BATT_VCC is lower than VCCQ.
Workaround: Follow the steps below to fix the problem:
1. Remove the 0-ohm resistors R29B and R38B and battery holder B1.
2. Add 30-AWG wire from TP11 (red) to TP22 (red).
Status: No Fix
Board Rev: Rev A
5. Incorrect Boot Mode Selected For PXA210 Processor
Problem: The DCPXA210 processor card is configured to boot the PXA210 processor in 32-bit mode.
Implication: PXA210 does not function correctly. It only supports a 16-bit data bus.
Workaround: Follow the steps below to change the boot mode:
1. Remove the 0-ohm resistor, R65B.
2. Add 30-AWG wire from R65B pad attached to ball F14 to +3.3 V.
Status: No Fix
Board Rev: Rev A