Filter
Top Products
10
hardware documentation
2.2.3. Diagnostics Information
Anytime the configuration setup menu is displayed, you may press the D key to display diagnostics information on the
screen. The information displayed appears similar to that shown in the lower half of the screen image below. Once you
press the D key, the information displayed remains until you reboot your computer.
Intel(R) Boot Agent GE v1.2.19
Setup Menu
Network Boot Protocol
Boot Order
Show Setup Promt
Setup Menu Wait Time
PXE (Preboot eXecution Environment)
Try local drives first, then network
Enabled
2 seconds
Diagnostic Support Information
PWA Number 00E300-000 MAC Address 00005B00D8A1
Memory C0100000 I/O CC00 IRQ 0A UMB CC800
PCI ID 8086/1076/8086/1076/05 Slot 0200
Flags 0108:4100:0000:0001:00FF:L
Select remot boot protocol
<ESC> <SPACE> <ENTER> <E>
Cancel Changes Change Value Next Option Save Configuration
Figure 2.2: Setup Screen with Diagnostic Messages
Diagnostics information may include the following items:
Item Description
PWA Number The Printed Wire Assembly number identifies the adapter's model and version.
MAC Address The unique ethernet address assigned to the device.
I/O The I/O address for PCI access determined by the software. On cards without an I/O address, all zeroes
are displayed.
Memory The memory map PCI access address determined by the software.
Slot The slot number