Filter
Top Products
5: System Configuration
User’s Manual
5•17
Power Management Setup
Main Section Functions
Configures power management settings. These are over-
ridden by ACPI power management in Windows.
Default & Autodetected Settings
Everything on this screen is an optimized default.
Setting Options & Constraints
You can select the Minimum or Maximum configurations
rather than the User Defined defaults. You can customize
all settings in User Defined mode. If your OS supports
power management, configure it there.
The Soft-Off by PWR-BTTN line controls the function of
the system housing power button. The default sets it to
turn the system on and off when you press the button.
The alternate setting, delay 4 Sec., requires you to press
the power button for more than four seconds before the
system will turn off.
You can also set a date and time for the system to turn on
or wake up using the Resume by Alarm settings.
CMOS Setup Utility – Power Management Setup