FS-979 User’s Manual Hardware Setup
Memory installation 17
2.4.2 <Memory Installation>
FS-979 has four 240-pin DDR2 DIMM support up to 4GB of memory capacity. The memory
frequency supports 400/533MHz (100MHz x 4 or 133MHz x 4). Only Non-ECC memory is
supported. Dual-Channel technology is supported while applying two same modules.
Notice: When applying 4GB of memory, due to the memory resource issue, the
available memory size would be less than 4GB.
Group B
Group A
128-pin 112-pin
Please check the pin number to match the
socket side well before installing memory
module.