Filter
Top Products
GA-8I915PM-FS Motherboard - 18 -
English
8) F_PANEL (Front Panel Jumper)
Please connect the power LED, reset switch and power switch etc. of your chassis front panel to
the F_PANEL connector according to the pin assignment below.
1
2
19
20
HD-
HD+
RES+
RES-
NC
MSG-
MSG+
PW-
PW+
IDE Hard Disk
Active LED
Message LED/
Power/
Sleep LED
Power
Switch
Reset Switch
HD (IDE Hard Disk Active LED) Pin 1: LED anode(+)
Pin 2: LED cathode(-)
RES (Reset Switch) Open: Normal Operation
Close: Reset Hardware System
PW (Power Switch) Open: Normal Operation
Close: Power On/Off
MSG (Message LED/Power/Sleep LED) Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC NC
1
9
2
10
9) AZALIA_FP (Front Audio Connector)
If you wish to use the front audio function, connect the front panel audio module to this connector.
Check the pin assignments carefully while you connect the front panel audio module. Incorrect
connection between the module and connector will make the audio device unable to work or even
damage it. For optional front panel audio module, please contact your chassis manufacturer.
Pin No. Definition
1 MIC2_L
2 GND
3 MIC2_R
4 -ACZ_DET
5 Line2_R
6 FSENSE1
7 FAUOIO_JD
8 No Pin
9 LINE2_L
10 FSENSE2
Pin No. Definition
1 MIC
2 GND
3 MIC Power
4 N/A
5 Line Out (R)
6 N/A
7 N/A
8 No Pin
9 Line Out (L)
10 N/A
HD Audio: AC'97 Audio: