Filter
Top Products
BIOS Setup- 29 -
English
CPU Hyper-Threading
Enabled Enables CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported.
(Default value)
Disabled Disables CPU Hyper Threading.
Limit CPUID Max. to 3
Enabled Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled Disables CPUID Limit for windows XP. (Default value)
No-Execute Memory Protect
(Note)
Enabled Enable No-Execute Memory Protect function. (Default value)
Disabled Disable No-Execute Memory Protect function.
CPU Enhanced Halt (C1E)
(Note)
Enabled Enable CPU Enhanced Halt (C1E) function. (Default value)
Disabled Disable CPU Enhanced Halt (C1E) function.
CPU Thermal Monitor 2 (TM2)
(Note)
Enabled Enable CPU Thermal Monitor 2 (TM2) function. (Default value)
Disabled Disable CPU Thermal Monitor 2 (TM2) function.
CPU EIST Function
(Note)
Enabled Enable CPU EIST function. (Default value)
Disabled Disable EIST function.
Full Screen LOGO Show
This feature allows you to show the company logo on the bootup screen.
Disabled Displays the POST messages at boot.
Enabled Displays the LOGO on the full screen at boot. (Default value)
Intel OnScreen Branding
This feature allows you to show the Intel brand logo on the bootup screen.
Disabled Don't display Intel brand logo.
Enabled Display Intel brand logo at boot. (Default value)
(Note) This item will show up when you install a processor which supports this function.