Intel GA-945PL-S3P Computer Hardware User Manual


 
Hardware Installation- 11 -
English
Rear Panel I/O 1 PS/2 keyboard port
1 PS/2 mouse port
1 parallel port
1 serial port
4 USB 2.0/1.1 port
1 RJ-45 ports
6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear
Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out)
I/O Control IT8718 chip
Hardware Monitor System voltage detection
CPU temperature detection
CPU / Power / System fan speed detection
CPU warning temperature
CPU / Power / System fan failure warning
Supports CPU Smart Fan function
BIOS 1 4 Mbit flash ROM
Use of licensed AWARD BIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
Additional Features Supports @BIOS
Supports Download Center
Supports Q-Flash
Supports EasyTune
(Note 4)
Supports Xpress Install
Supports Xpress Recovery2
Supports Xpress BIOS Rescue
Bundle Software Norton Internet Security (OEM version)
Form Factor ATX form factor; 30.5cm x 19.3cm
(Note 1) Enable use of a Core
TM
2 CPU with 1333 MHz FSB through overclocking. You must install the
FSB 1333 MHz Core
TM
2 CPU with DDRII 533 (or above) memory module(s).
(Note 2) To use a DDRII 667 memory module on the motherboard, you must install a FSB 800 MHz
(or above) CPU.
(Note 3) Some memory configurations will result in memory frequency being reduced from the original
frequency. (Please refer to to Page 15 for more information.)
(Note 4) EasyTune functions may vary depending on different motherboards.