BIOS Setup- 43 -
English
2-3 Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
On-Chip IDE Channel0 [Enabled]
IDE Prefetch Mode [Enabled]
NV Serial-ATA Controller [All Enabled]
Serial-ATA RAID Config [Press Enter]
Onboard SATA-II Ctrl1 [Enabled]
Onboard SATA-II Ctrl1 Mode [IDE]
Onboard SATA-II Ctrl2 [Enabled]
Onboard SATA-II Ctrl2 Mode [IDE]
On-Chip MAC Lan [Auto]
On-Chip MAC1 Lan [Auto]
On-Chip SMART LAN [Press Enter]
Onboard LAN1 Controller [Enabled]
Onboard LAN2 Controller [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard Audio Function [Auto]
On-Chip USB [V1.1+V2.0]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Onboard 1394 [Enabled]
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
Legacy USB storage detect [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3