Filter
Top Products
IMB200 LGA775 ATX MB User Manual
Award BIOS Utility
38
7.3 Standard CMOS Setup
“Standard CMOS Setup” allows you to record some basic
hardware configurations in your computer system and set the
system clock and error handling. If the motherboard is already
installed in a working system, you will not need to select this
option. You will need to run the Standard CMOS option,
however, if you change your system hardware configurations,
the onboard battery fails, or the configuration stored in the
CMOS memory was lost or damaged.
At the bottom of the menu are the control keys for use on this
menu. If you need any help in each item field, you can press
the <F1> key. It will display the relevant information to help
you. The memory display at the lower right-hand side of the
menu is read-only. It will adjust automatically according to the
memory changed. The following pages describe each item of
this menu.