Intel KM4M Computer Hardware User Manual


 
3-20
MS-6734 M-ATX Mainboard
Date(of Month) Alarm
The field specifies the date for Resume By RTC Alarm. Settings: 0~31.
Time(hh:mm:ss) Alarm
The field specifies the time for Resume By RTC Alarm. Format is <hour><minute>
<second>.
IRQ Activity Monitoring
Press <Enter> and the following sub-menu appears.
Primary INTR
Selecting ON will cause the system to wake up from power saving modes if activity
is detected from any enabled IRQ channels. Settings: ON, OFF.
IRQ3~IRQ15
IRQ3~IRQ15 enable or disable the monitoring of the specified IRQ line. If set to
[Enabled], the activity of the specified IRQ line will prevent the system from entering
power saving modes or awaken it from power saving modes.
MSI Reminds You...
IRQ (Interrupt Request) lines are system resources allocated to I/O
devices. When an I/O device needs to gain attention of the operating
system, it signals this by causing an IRQ to occur. After receiving the
signal, when the operating system is ready, the system will interrupt
itself and perform the service required by the I/O device.