Intel M1920 Computer Hardware User Manual


 
BIOS SETUP
34 MI920 User’s Manual
Phoenix - AwardBIOS CMOS Setup Utility
2
nd
SuperIO Device
Onboard Serial Port 3 2B0H
ITEM HELP
Serial Port 3 Use IRQ IRQ11
Menu Level >
Onboard Serial Port 4 2B8H
Serial Port 4 Use IRQ IRQ10
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.
On-chip Primary PCI IDE Enabled
This field, by default, is enabled
OnChip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select Enabled to activate each channel
separately.
IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster.
Rather than have the BIOS issue a series of commands that transfer to or
from the disk drive, PIO (Programmed Input/Output) allows the BIOS to
communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select
the best available mode.
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are Auto and
Disabled.