Filter
Top Products
MIC-3321 User Manual 22
CPU L1 & L2 Cache
Enabled (default) Enable cache
Disabled Disable cache
Note: The internal cache is built into the processor.
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on
the computer. If this is set to Enabled, BIOS will shorten or skip some
check items during POST.
Enabled (default) Enable quick POST
Disabled Normal Normal POST
First/Second/Third Boot Device and Boot Other Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items. The settings are Hard Disk, CDROM,
USB-FDD, USB-ZIP, USB-CD-ROM, LAN 1, LAN 2 and Disabled.
First boot device (default) USB-CD-ROM
Second boot device Hard Disk
Third boot device CD-ROM
Boot Up NumLock Status
On (default): Keypad: numeric keys
Off: Keypad: arrow keys
Gate A20 Options
Normal: A20 signal is controlled by keyboard or chipset hardware.
Fast (default): A20 signal is controlled by port 92 or chipset method
Note: When you boot by USB-CD-ROM, please install
WinXP with SP1 or Win 2000 with SP3.