Filter
Top Products
PCI-6886 User’s Manual 18
2.16 VGA/LVDS interface connections
The PCI-6886’s display interface can drive conventional CRT displays
and is capable of driving a wide range of LVDS flat panel displays as
well. The board has two display connectors: one for standard CRT VGA
monitors, and one for LVDS flat panel displays.
2.16.1 CRT display connector (CN11)
CN11 is a standard 15-pin connector used for conventional CRT displays.
Users can drive a standard progressive scan analog monitor with pixel
resolution up to 1600 x 1200 at 85 Hz. Pin assignments for CRT display
connector CN11 are detailed in Appendix B.
2.16.2 LVDS LCD panel connector(CN15)
PCI-6886 uses the Intel 852GM to supports single or dual-channel LVDS
panels up to UXGA panel resolution with frequency range from 25MHz
to 112MHz.
The display mode can be 2 channels (2 x 18bit) LVDS LCD panel dis-
plays Users can connector to either an 18, 24, or 36 bit LVDS LCD with
CN15.
2.16.3 LCD inverter connector(CN20)
The LCD inverter is connected to CN20 via a 5-pin connector to provide
+5V/+12V power.
2.16.4 DVI connector (CN16)
Digital Visual Interface (DVI) is the standard interface for high-perfor-
mance connection between PCs and Flat Panel Displays, Digital CRT dis-
plays, Projectors, and HDTV. The PCI-6886 is able to drive a DVI
connector display at a pixel rate of up to 165MHz, supporting UXGA res-
olution displays and hot plug detection.
2.17 USB connectors (CN9,CN10)
The PCI-6886 board provides up to four USB (Universal Serial Bus)
ports. This gives complete Plug and Play, and hot attach/detach for up to
127 external devices. The USB interfaces comply with USB specification
Rev. 2.0, and are fuse protected.
The USB interface is accessed through the 5 x 2-pin flat-cable connector,
CN10 (USB1, 2),CN9(USB3, 4). You will need an adapter cable if you