Intel PT800DBP Computer Hardware User Manual


 
17
(5) Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your computer
without having to turn off your power switch. This is a preferred method of rebooting in
order to prolong the lift of the system’s power supply. See the figure below.
(6)
Speaker connector: SPEAK
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(7) Power LED
: PWR LED
The Power LED is light on while the system power is on. Connect the Power LED from
the system case to this pin.
(8) Power switch
: PWR BTN
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the
system.
System Case Connections
JW
_
FP
Pin 1
RESET
PWR-BTN
HDLED
VCC5
HDDLED
PWR-LED
PWRBTN
GND
ACPILED
VCC5
RSTSW
GND
NC
SPEAK
SPKR
GND
NC
VCC5
Pin 1
PWRLED
Pin 1
(9) Wake On-LAN Headers
(3-pin) : WOL
This connector connects to a LAN card with a WAKE ON-LAN output. This connector
power up the system when a wake up signal is received through the LAN card.
NOTE:
This feature requires that Wake On LAN or Ring In Wake up is enabled.
Wake-On-LAN Headers
WOL
13
5VSB
GND
WOL