Filter
Top Products
Intel® RAID Controller SRCSASPH16I Hardware Guide 14
Table 2 lists the specifications for the Intel
®
RAID Controller SRCSASPH16I.
Array Performance Features
Table 3 shows the RAID Controller SRCSASPH16I array performance features.
Table 2. Specifications
Specification Intel
®
RAID Controller SRCSASPH16I
Processor
(PCI Controller)
Intel
®
80333 I/O processor at 500 MHz
Operating Voltage +3.3 V, +12 V
Card Size Full-height PCI Express* adapter card size (6.6 inches by 4.2 inches)
Array Interface
to Host
PCI Express* Rev 1.0A, x8 lane width 2.5 Gbps
SAS Bus Speed 3 GBps per port, point-to-point
SAS Controller One LSI SAS 1068 controller
SAS / SATA Ports 4x4 internal ports. Supports 122 SAS/SATA devices using expanders, 64
virtual disks.
Cache Integrated 256 MB RAM, optional battery backup
Firmware 4 MB in reflashable flash ROM
Compatible Devices Mixed capacity, mixed SATA and SAS in different enclosures; non-disk
devices, including expanders.
Cabling Small, thin cables do not restrict airflow; shared connectors for multiple
drive types.
Redundant
Configuration
32 Kb NVRAM and config on disk (COD) store RAID configuration.
Enclosure
Management
I
2
C out-of-band, SES2 in-band, SAF-TE (LEDs)
Table 3. Array Performance Features
Specification Intel
®
RAID Controller SRCSASPH16I
PCI Express* Host
Data Transfer Rate
2.5 Gigabit/s per lane
Drive Data Transfer
Rate
3 Gigabit/s per lane
Maximum
Scatter/Gathers
26 elements