Intel TIGH2U Server User Manual


 
TIGH2U Base Model 0 Configuration
All Production SKUs are base model 0 SKUs (no CPU, heatsink, memory, hard drive or
plug-in adapters are provided). Those components must be ordered separately as
Accessories from Intel or from third party vendors listed in the Tested Hardware and
Operating System List (THOL). The below table lists how many of each component is
included in the Production model 0 SKU.
The table below lists which components are included in the base model 0 SKUs and
which ones must be ordered separately or as optional accessories.
Component Description
AC Mod 0
Configuration
DC Mod 0
Configuration
AC power supply (600 W) 1 included -
DC power supply (600 W) - 1 included
Filler Panel in 2
nd
power supply bay 1 included
Chassis (bezel, sheet metal, top cover, PCI carrier) 1 included
Server Board T5000PAL 1 included
Bezel (unpainted) 1 included
PCI Riser FH-FL (two PCI-Express and one PCI-X slots) 1 included
PCI Riser LP (two PCI-Express slots) 1 included
FB-DIMM slots (memory not included) 8 included
Trays for hot-swap 2.5” SAS Hard Disk Drives 6 included
Filler Panel in optical device bay 1 included
Rear Panel GbE NIC (Cu) ports (via Server Board) 2 included
Server Deployment Toolkit (CD) 1 included
Quick Start Guide 1 included
Power Cable Purchase separately
1
SW RAID 0/1/10 Included
HW RAID 5 Optional Accessories
2
Intel® Z-U130 Value Solid State Drive Optional Accessory
2
Mounting kit for Intel® Z-U130 Value Solid State Drive Optional Accessory
2
Remote Management Module 2 Optional Accessory
2
PCI-X FH-FL Riser (3 PCI-X slots) Optional Accessories
2
Ethernet I/O Module
(dual Gigabit rear ports) Optional Accessory
2
SAS I/O Expansion Module
(x4 external rear port) Optional Accessory
2
Rack Mount Kits Optional Accessory
3
Processor (refer to “Details on Ordering Processors”) Purchase separately
4
Heatsink Accessory or purchase separately
Memory Purchase separately
4
Hard Disk Drive Purchase separately
4
Optical Drive Purchase separately
4
1
Refer to AC power cord accessory in this section
2
Refer to “Production Spares/Accessory List” in section III
3
Refer to “Rack Mounting Options” in the Appendix
4
Should be purchased separately (parts not listed in this document)
3/28/2008 v 1.2 6 of 20