Notes on the TIGH2U Model 0 Configuration and Options:
PCI Risers
o The base configuration comes standard with two PCI Risers supporting up to
five PCI slots. These include:
One low-profile riser supporting two PCI-Express (PCIe) slots
One full-height, full-length riser supporting three slots: two PCIe x4
and one PCI-X.
o Additional full-height, full-length risers (below) are supported and available
as accessories (refer to “Production Spares/Accessories List” in section III).
PCI-X (active): three independent PCI-X, each with maximum 133
MHz
PCI-X (passive): two PCI-X with maximum 100 MHz and one PCI-X (66
MHz) all on a shared PCI bus
HW RAID
o While SW RAID 0/1/10 is supported on the base configuration, HW RAID 5
support can be enabled via a set of optional accessories (refer to
“Production Spares/Accessories List” in section III).
o Components required are NSCRAID01W (NSC2U RAID5 Kit – includes the I-
Button (license), battery cable) and the AXXMINIDIMM (128 MB Mini DIMM
registered DDR-2 for RAID cache.)
o An additional option is the AXXRSBBU3 (Intel® RAID Smart Battery Backup
module provides up to 72 hours of cache memory retention when used with
AXXMINIDIMM). The cable to connect the battery is included in the
NSCRAID01W kit.
Intel® Z-U130 Value Solid State Drive
o Support for the Intel® Z-U130 Value Solid State Drive is available via a
selection of optional accessories (refer to “Production Spares/Accessories
List” in section III).
o Components required are an Intel® Z-U130 Value Solid State (select desired
capacity) as well as a mounting kit (TMWVSSDRIVE01W) to mount it inside
the chassis.
o Solid state drives are available in several sizes, enabling an array of product
customization options. These drives securely mount inside the chassis
offering
Storage: independent of traditional disk drives
Boot OS from solid state drive; store data on hard drive
Store backup image of boot drive
Add a server partition to the server
Any other customer design options
3/28/2008 v 1.2 7 of 20