Filter
Top Products
Intel Server RAID Controller U3-1L (SRCU31L) 15
Quick Start Guide
12 A screen prompt will ask which components (see below) you wish to
install. Select the following components and press F10 to continue. See
figure below.
BKSTROSM.HAM
HTTP and Winsock Services
RAID Management Agents
Preselect Components
The appropriate files are copied and the AUTOEXEC.NCF and
STARTUP.NCF files are modified as necessary.
13 After the installation is complete, reboot the server.
✏ NOTE
See Chapter 4, “Using the Storage Console” in the user’s manual for
instructions on customizing your RAID volumes using Storage Console.
Setup and Installation for UnixWare
†
7.1 or 7.1.1
Software Requirements
• SRCU31L CD-ROM
• Hard disk space: minimum 20 MB
• SRCU31L UnixWare Installation Disk (HBA diskette) (one blank high
density floppy diskette required)
• SCO UnixWare 7.1 or 7.1.1 software with Netscape 4.08 or greater
*
* Not supplied