Filter
Top Products
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
™
Wireless G Broadband Router, Model 503693.
This quick install guide presents the rudimentary steps required to set up
and operate this device. For more detailed instructions and specications,
refer to the user manual 1) on the CD enclosed with this product; 2) on
the Web site listed below; or 3) in some cases, printed and enclosed
with this product. Contact your INTELLINET NETWORK SOLUTIONS
dealer with comments or questions, or visit www.intellinet-network.com
for information on the latest software and rmware updates, related
products and additional contact information.
NOTE: Some screen images are modied to t the format of this guide.
installation
Before you begin the installation procedure, conrm that you have:
• A compatible operating system (Windows 98/NT/Me/2000/XP, Linux
or Mac) and Web browser (Internet Explorer 5.0 with JavaScript
function, or Netscape Navigator 6.0 or above);
• A LAN card which has been correctly installed in your computer;
• Your user ID and password if you are xDSL user;
• Basic information like whether your IP address is static or dynamic if
you connect to the Internet by a LAN or WAN.
NOTE: If your computer currently has ADSL PPPoE dial-up software
installed, back up your installation software and un-install your ADSL
PPPoE dial-up software by going to Start, then Control Panel, then Add
or Remove Programs.
Hardware Connections
1. Connect your broadband cable (xDSL, cable modem or LAN/leased
cable) with the WAN port of the Wireless G Broadband Router.
2. Connect your computer LAN card’s port or your switch’s Uplink port
with one of the LAN ports of the Wireless G Broadband Router using
a common network cable.
3. Connect any other PC(s) to available LAN ports.
3