Filter
Top Products
36 Intermec EasyCoder PD4—User’s Guide
Chapter 5—Printing
Setup Options Note
Media Type Direct ermal Default
ermal Transfer
Density
(see note on the
next page)
1 (lightest image)
.... Default 10
15 (darkest image)
Speed 2" per second
3" per second
4" per second Default
5" per second Not with 300 dpi
6" per second Not with 300 dpi
Option Strip Mode
Cutter Mode
Option Off Default
Paper type Black Mark
Gap Paper Default
Plain Paper
Com Port Set Baud Rate
4800 bps
9600 bps Default
19200 bps
38400 bps
Parity Setup No Parity Default
Odd Parity
Even Parity
Data Length
7 bits
8 bits Default
Stop bit 1 bits Default
2 bits
LCD Language English Default
Simplified Chinese
Chinese characters
Traditional Chinese Chinese characters
Setting review Review setting items without any changes (scroll by pressing Pause)
Exit Exit & Save Default
Exit & No save