Intermec PF8T Printer User Manual


 
Chapter 1 — Using the PF8 Printers
PF8d/PF8t Printers User’s Guide 3
Features of the PF8 Printers
This section describes the front controls and indicators,
components of the media compartment, and connections located
on the rear of the PF8d and PF8t printers.
Front Controls and Indicators
The PF8 printers are controlled by using a Power switch, a Feed
button, and a multi-color status LED.
The Power switch is located on the side of the PF8d and on the
back of the PF8t.
You can use the Feed button in two ways:
•Tapping it
When power is turned on and the printer is loaded with
media (and possibly ribbon), tapping the Feed button causes
the media to form feed.
•Holding it down
When power is turned on, holding the Feed button down
causes the printer to enter Media Sensing mode and print the
printer configuration page when the button is released.
There are also cover open buttons located on each side of the
printer which you press to access the media compartment.
PF8d and PF8t Front Controls
Status LED
Power
switch
Cover
open
button
Feed
button
PF8d
Status LED
Feed
button
PF8t
Cover
open
button
Power
switch