IOGear GCS1792 Switch User Manual


 
Note: In order to perform a rmware upgrade, you need to use a computer that’s not connected to the KVM.
Step 1
Connect the provided rmware upgrade cable to the rmware upgrade port of the KVM and the serial port
of your computer. Connect power adapter to your power outlet and the KVM.
Step 2
Go to www.iogear.com to download the latest available rmware or the specic rmware that you wish to
upgrade to.
Step 3
Shut down all the computers that are connected to the KVM. Then Invoke Firmware Upgrade Mode.
(Please refer to Hotkeys Setting Mode section.)
Step 4
Extract the le with WinRAR or compatible software. Then double click on the execute le to begin with
the Firmware Upgrade Utility.
26
27
Firmware Upgrade