Filter
Top Products
9
If at any point your MediaShair Hub is not operating correctly or if the pre-shared key is lost,
you will need to perform a hard reset to restore the MediaShair Hub to Factory Default
Settings.
a. Locate the Reset Button on the back of the unit.
b. Insert a paperclip into the reset button opening and hold the button down for 5
seconds, then release.
c. The MediaShair Hub will reset and Wi-Fi Indicator light will flash momentarily.
Once the Wi-Fi Indicator lights solid, the MediaShair Hub has been reset back to
factory default settings.
MediaShair Hub Setup (iPod
®
/iPhone
®
/iPad
®
)
MediaShair Power Up:
1.
Press and hold the power button for 5 seconds to turn on the MediaShair Hub.
The green power LED will turn on.
The blue Wi-Fi LED will begin flashing and turn solid when the Wi-Fi network is live.
App Store: 2.
Open the App Store on your iPod, iPhone or iPad. Search for the MediaShair app a.
and download it to your device.
After installation is complete, the MediaShair App icon will be shown on the device. b.
Device Settings: 3.
Open the Settings menu on your device and set Wi-Fi to ON. a.
Choose MediaShair-XXXX network (-XXXX is the last 4 digits of the device’s MAC ID). b.