Filter
Top Products
Troubleshooting
64
4. What is the difference between bridge mode and node mode in the HomePlug Ethernet
Bridge (GHPB01)?
Bridge mode operates without software installation and can work with any 10/100Base-T or
10Base-T Ethernet connections. By connecting the bridge to a router, switch, or Ethernet
based device (XBOX, PlayStation, Web Tablet, PocketPC, Computer, etc.), you will be able
to make these devices bridge onto the HomePlug network. Currently, the GHPB01 only
supports 2 bridges per HomePlug Network.
Node mode operates by connecting the HomePlug USB adapter (GHPU01) or Ethernet
bridge (GHPB01) to one computer (ONLY) and installing drivers onto the computer, allowing
it to set the device into Node Mode. The advantage with Node Mode operation is there is no
limitation to the number of nodes that can operate on a HomePlug network.
5. Why do I get a blue screen on boot-up after installation under Windows 98?
You probably have Windows 98 Virtual Private Networking Adapter Installed. This adapter