Filter
Top Products
Introduction
6
Front View: (Drawing)
1. Power LED - lights up in green when plugged into
a power outlet
2. Collision LED - lights up in green whenever there
is collision
3. Link LED - lights up in green after plugged into a
power outlet
4. ACT LED - blinks in green when there is network
activity
5. Ethernet port - connecting to the computer
6. Normal/Uplink button - you only need to use this
button when connecting the bridge to a switch/hub.
Push this button when connects to the Uplink port on a switch.
Another criteria for you to decide whether you need press this
button is to look at the light inside the Ethernet port, if it is not on or
flashing, you need to press this button.
Back View:
1. Power port - connecting to the wall outlet