IOGear M1057 Network Card User Manual


 
18
19
Connecting to a USB device
1. Connect the USB cable on your USB device to one
of the USB ports on the USB Net ShareStation, and
make sure both the USB device and the USB Net
ShareStation are powered on. The USB device will
then show up on the
IOGEAR Net ShareStation
utility underneath the “
IOGEAR GUIP204..” as a
GREEN icon . The green icon indicates that the
USB device is ready to be connected. If for any
reason the USB device does not show up, please
click the “Search” button to refresh the control center.
Note: If your USB device does not show up on
the list, please try to disconnect and reconnect
the device to the GUIP204. Also, please make
sure the GUIP204 and your USB device are
powered on.