IOGear M1057 Network Card User Manual


 
20
21
2. The printer will be detected as if it was plugged
directly into your computer.
3. If this printer is connected to your computer for the
rst time, then you will need to complete the setup
wizard for the printer software and driver installation.
Please follow the wizard to setup the printer. Make
sure you have the correct CD or drivers for your
printer and follow the on-screen steps in the wizard.
Once the wizard is completed, you will be able to
use the printer as if it was directly connected to your
computer.
Note: Please refer to your printer user manual
on how to setup your printer on the computer.