Juniper Networks T1600 Network Router User Manual


 
Duplex SC/PC connector (RX and TX)Cables and connectors
Status LED, one bicolor:
OffPIC is not enabled
GreenPIC is operating normally
RedPIC has an error or failure
Port LEDs, one pair:
LinkIf green, the port is online; if there is no light, the port is down
RXIf flashing green, the port is receiving data; if there is no light, the port might be on
but is not receiving data
LEDs
Table 29: Optical Interface Support for 10-Gigabit Ethernet DWDM PICs
Extra-Long Wavelength Serial DWDM, LAN RateParameter
Single-modeOptical interface
Dense wavelength division multiplexing (DWDM)Transceiver type
ITU-T G.694.1Standard
9/125 SMF cable: 49.6 miles/80 kmMaximum distance
1528.77 through 1563.86 nm, 100-GHz ITU gridTransmitter wavelength
0 through 4 dBmAverage launch power
9 dBmTransmit extinction ratio
7 dBm through 24 dBmAverage receive power
7 dBmReceiver saturation
24 dBmReceiver sensitivity
66 10-Gigabit Ethernet DWDM PIC
T1600 Internet Routing Node PIC Guide