Filter
Top Products
-7-
Hardware Installation
JC-M102U/M104U
5. Now the PC connections will be made with the USB (keyboard,
mouse), speaker, microphone, and 15-pin monitor (VGA)
connections to the JUSTCOM All-in- 1 cable. Connect cable with the
male side to the rear panel of the JC-M102U/ M104U unit to the
connector labeled CPU1. Repeat this for all PCs.
Keyboard Mouse
VGA
Audio
Microphone
6. Now power up all computers simultaneously, the first computer will be
shown on the monitor. You may check if the mouse and keyboard
work after the system has booted up.If this is OK, Use the button to
push the other computer and verify the functionality in the same way.
In case you find errors, first check all cable for proper connections.