Filter
Top Products
4
Settings
26
The structure of the Settings menu
The menu for this device is structured as follows:
CAUTION
●
There are items that cannot be modied
without entry.
Picture Adjust
01
Picture Mode
Adjusts the pattern of the projected image.
Setting
:
Cinema 1, Cinema 2, Cinema 3, Natural, Stage, Dynamic, User 1, User 2
02
Contrast
Adjusts the contrast of the projected image.
Setting
:
–50 to 50
03
Brightness
Adjusts the brightness of the projected image.
Setting
:
–50 to 50
04
Color
Adjusts the color density of the projected image.
Setting
:
–50 to 50
05
Tint
Adjusts the hue of the projected image.
Setting
:
–50 to 50
06
Color Temp.
Sets the color temperature of the projected image.
Setting
:
5800K, 6500K, 7500K, 9300K, High Bright, Custom 1, Custom 2, Custom 3
07
Gamma
Sets the gradation characteristics of the projected image.
Setting: Normal, A, B, C, D, Custom 1, Custom 2, Custom 3
08
Advanced
Adjusts the contours of the image and detailed composition of the image.
Setting: Sharpness, NR, CTI, Clear Motion Drive
09
Lens Aperture
Sets the lens aperture.
Setting: 1, 2, 3
10
Reset
Reset the setting.
Input Signal
11
HDMI
Congures HDMI input signal.
Setting: Input, Color Space, Control with HDMI
12
COMP.
Congures the input signal for the component video input terminals.
Setting: Y Pb/Cb Pr/Cr, RGB, SCART
13
Video/S-Video
Congures the Video/S-Video input signals.
Setting: NTSC, Setup Level, Color System
14
Aspect (Video)
Congures the screen size of the projected image.
Setting: 4:3, 16:9, Zoom
15
Aspect (Computer)
Congures the screen size of the projected image.
Setting: Auto, 1:1, Full
16
V-Stretch
When set to “On”, the projected 2.35:1 image will be stretched vertically to the panel resolution.
Setting: On, Off
17
Picture Position
Adjusts the horizontal/vertical position of the projected image.
18
Over Scan
Selects whether or not to set over scan for the SD video signal.
Setting: On, Off
19
Mask
Masks (Hides) the outer area of the projected image.
Setting: 2.5, 5, Off
20
Film Mode
Selects this to view movies shot on lm.
Setting: Auto, lm, Off