Filter
Top Products
27
ENGLISH
Getting Started Preparation Basic Operation Settings Troubleshooting Others
zThe horizontal and vertical directions are reversed when the image is flipped to the left or right, or flipped up or down.
zTo adjust, use still images with distinct outlines.
zAs the adjustments are minor, the effect may be difficult to see for some images.
zThis setting can also be configured from the remote control. (p P12)
z“Contrast”, “Brightness”, “Color”, “Sharpness”, “DNR”, “Color Temp.”, “Gamma” and “Offset” are registered in “Image Profile”.
Image > Offset
I Offset
Adjusts the respective brightness of the red, green and blue colors in dark image areas. (Offset level)
Red (Less red) b60 f 60 (More red)
Green (Less green) b60 f 60 (More green)
Blue (Less blue) b60 f 60 (More blue)
Image > Pixel Adjust
J Pixel Adjust
Makes fine adjustments of 1 pixel unit for each minor color shift in the horizontal/vertical direction of the image.
Horiz. Red (Moves red to left) 1 f 7 (Moves red to right)
Horiz. Green (Moves green to left) 1 f 7 (Moves green to right)
Horiz. Blue (Moves blue to left) 1 f 7 (Moves blue to right)
Vert. Red (Moves red down) 1 f 5 (Moves red up)
Vert. Green (Moves green down) 1 f 5 (Moves green up)
Vert. Blue (Moves blue down) 1 f 5 (Moves blue up)
Setup > Image Profile
K Image Profile
Configures the image profile. (pP34)
Cinema Select this to view images with movie quality in a dark room.
Natural Select this to view projected images with quality as-is in a dark room.
Dynamic Select this to view images with clear quality in a bright room.
User1 Selects image profile registered in “User1”.
User2 Selects image profile registered in “User2”.
User3 Selects image profile registered in “User3”.
Setup > Profile Memory
L Profile Memory
Registers or deletes image profiles.
Save User1 Registers image profile in “User1”.
Save User2 Registers image profile in “User2”.
Save User3 Registers image profile in “User3”.
Clear User1 Returns image profile in “User1” to factory setting (natural).
Clear User2 Returns image profile in “User2” to factory setting (natural).
Clear User3 Returns image profile in “User3” to factory setting (natural).
Reset Cinema Returns image profile in “Cinema” to factory setting.
Reset Natural Returns image profile in “Natural” to factory setting.
Reset Dynamic Returns image profile in “Dynamic” to factory setting.
DLA-RS2_EN.book Page 27 Friday, October 12, 2007 2:43 PM