Filter
Top Products
4
Refer to the following to confirm the connection status.
Connection status can be found at the top right of the app interface. Color of the indicator changes to notify the
projector status to the user.
A Connection is made between the projector and remote (iOS device)
B Connection is deactivated between the projector and remote (iOS device)
C When the connection is deactivated (as in B above), go to Setting
→ IP Address, and switch ON Connect.
This completes the initial setup.
5
Confirm connection status between the projector and iOS app
Connection is made with the projector.
Connection with the projector is deactivated.
Switch ON Connect