Filter
Top Products
3333
Main Menu
Picture Function
Setting for the picture quality.
Item To do Setting value
Backlight Adjusts the brightness of the display. –20 to +20
Aperture*
1
Activates/deactivates the function at the level set in “Aperture Level”. Off, On
Aperture Level*
1
Compensate the frequency response of the luminance signal of the video signal. 01 to 10
CTI Adjust the clearness of the outlines of the chrominance signal. Off, Normal, Hard
LTI Adjust the clearness of the outlines of the luminance signal. Off, Normal, Hard
Gamma Select the Gamma correction value. 2.2 is equivalent to Υ 2.2, 2.35 is equivalent to Υ 2.35,
2.45 is equivalent to Υ 2.45, 2.6 is equivalent to Υ 2.6.
2.2, 2.35, 2.45, 2.6
Color Temperature Select the color temperature. 9300K, 6500K, User
sub menu Display the sub menu which enables you to adjust the items in “Picture Function” while viewing the actual picture.
reset Restore the default settings for all the items in “Picture Function”.
*
1
Memorized for each input.
Size/Position Adjust
Adjusts the size and position of the picture.
Item To do Setting value
H Size*
1
Adjust the horizontal picture size.
Setting value varies
depending on the signals.
H Position*
1
Adjust the horizontal picture position.
V Size*
1
Adjust the vertical picture size.
V Position*
1
Adjust the vertical picture position.
sub menu Display the sub menu which enables you to adjust the items in “Size/Position Adjust” while viewing the actual picture.
reset Restore the default settings for all the items in “Size/Position Adjust”.
*
1
Memorized for each signal format.
Aspect
Sets the aspect ratio of the screen for displaying videos.
Item To do Setting value
Auto Aspect Select whether to adjust the aspect ratio (horizontal to vertical ratio of the screen) of the SD
signal automatically or manually (Manual Aspect).
Off, On
Manual Aspect*
1
Sets the aspect ratio (horizontal to vertical ratio of the screen) of the SD signal.
16:9, 4:3
SD4:3 Size*
1,
*
2
Selects the picture size when the input signal format is 4:3.
Normal, H Full, V Full
Normal : Matches the vertical picture size to the number of pixels.
H Full : Matches the horizontal picture size to the horizontal size of the screen. At
this time, the top and bottom of the picture are overscanned.
V Full : Enlarges the picture vertically.
16:9 Size*
1,
*
2
Selects the picture size when the input signal format is 16:9.
Normal, V Full
Normal : Matches the vertical picture size to the number of pixels.
V Full : Enlarges the picture vertically. At this time, the right and left of the
picture are overscanned and markers are displayed.
1:1*
3
Displays the picture in the original resolution of the input signal.
• The aspect ratio of the picture may change depending on the input signal.
• When the picture is overscanned, markers are displayed at the top, bottom, left and right.
Off, On
*
1
Not activate when picture is displayed in the 1:1 mode.
*
2
When the histogram, wave form monitor or vector scope is displayed, only "Normal" is available.
*
3
When the histogram, wave form monitor or vector scope is displayed, only "Off" is available.
Dynamic Setting values: Off, On
Adjusts the picture to be suitable for a bright place.
• When the function is turned on:
- “Backlight” and “Picture Sub Adjust” are grayed out and cannot be operated.
- The setting of “Backlight” is ineffective.
Zebra (DT-F9L5 only)
Settings for displaying the range of brightness.
Item To do Setting value
Zebra Mode
Activate / deactivate the function. Off, On
H-Level Threshold
Setting the maximum brightness of an image for Zebra. “Over” means the range which exceeds 100%.
5% to 100% (by 5%), Over
L-Level Threshold Setting the minimum brightness of an image for Zebra. 0% to 100% (by 5%)