Filter
Top Products
10
STAND BY
LAMP
TEMP
EMERGENCY
VIDEO
COMPUTER
SETTING
QUICK
ALIGN.
-
2
+
3
Controls and Features (Cont.)
Control Panel (Cont.)
7
VIDEO button
Use this button to select a device such as a VCR connected
to the AV IN terminal of the projector. Each time you press
the button, the selected device changes as follows:
8
COMPUTER button
Use this button to select a device connected to the
COMPUTER In -1 or -2 terminals. Each time you press
the button, selected device changes as follows:
9
SETTING button
Use this button to call up the setting menu. For details,
refer to “Making Basic Settings” on page 31.
p
QUICK ALIGN. +3 –2 button
While a submenu screen is shown, use this button to adjust
the values for the item selected. When no menu is shown,
the quick alignment function works.
• When a menu is shown
+ 3 button: The value for the selected item changes
(increases).
– 2 button: The value for the selected item changes
(decreases).
• When no menu is shown
Press the +3 button and –2 button at the same time:
QUICK ALIGNMENT is displayed on the screen and the
quick alignment function works (TRACKING, PHASE, H.
POS. and V. POS. are automatically adjusted). When the
adjustment is finished, the display goes off automatically.
Memo
The quick alignment function :
• Works for computer input (COMPUTER-1 and -2 input terminals)
signals.
• Does not work for video input (AV IN input terminal) signals.
CAUTION
• Automatic adjustment with the quick alignment function
should be done on a bright still-picture screen. This function
may not work correctly on a dark screen or motion-picture
screen. If adjustment with this function is not satisfactory,
adjust TRACKING, PHASE, H. POS. and V. POS. manually
(see pages 31, 37 and 38).
1
2
3
4
5
6
7
8
9
p
COMPUTER1
COMPUTER2
Y/C
VIDEO
Y, P
B
/B-Y,P
R
/R-Y
G1000S 05-14EN 98.9.21, 9:46 AM10