Filter
Top Products
30
OPERATE
VOL.
PAGE
BACK
PRESET
FOCUS
COMPUTER VIDEO
QUICK
ALIGN.
AV
MUTING
MENU/ENTER
Basic Operations (Cont.)
■ To display the main menu
The main menu is used to adjust or set the projected video picture
and the projector’s condition, etc. (PIXEL CLOCK, POSITION,
PICTURE, SOUND, OPTIONS, SOURCE, DECODER and
LANGUAGE). For operating the main menu, refer to pages 34 to
47.
• Press the remote control’s MENU/ENTER button.
The main menu appears on the screen.
Notes
• This button works only for numeric values. It does not work for switching
between ON and OFF or for selecting an item.
• For items such as PIXEL CLOCK (TRACKING and PHASE), POSITION (H.
POS. and V. POS.), SOUND (TREBLE and BASS), both settings are reset
at the same time.
Remote control unit
Remote control unit
Projector
■ Remote control unit
MENU/ENTER button
SETTING button
STAND BY
LAMP
TEMP
EMERGENCY
VIDEO
COMPUTER
SETTING
QUICK
ALIGN.
-
2
+
3
■ Projector button
PRESET button
■ To display the SETTING menu
The SETTING menu is used to make basic adjustments and
settings (TRACKING, PHASE, H. POS., V. POS., FOCUS, ZOOM*
and AUDIO-VOL.) of the video picture being projected after
installation (connection) or after inputs are switched. For operating
the SETTING menu, refer to “Making Basic Settings” on page 31.
* “ZOOM” cannot be adjusted.
• Press the projector’s SETTING button.
The SETTING menu is displayed on the screen.
SETTING
MENU/ENTER
Note
• To change the menu language displayed
English is set when the projector is shipped from the factory. The language
displayed can be selected from the following six languages: ENGLISH,
DEUTSCH (German), ESPAÑOL (Spanish), ITALIANO (Italian), FRANÇAIS
(French), and (Japanese). However, some words such as “QUICK
ALIGNMENT" are displayed only in English. Pronouns such as line display
and source display are similarly treated.
■ To use the remote control’s PRESET button
When resetting only the selected settings to the factory-set values,
press the remote control’s PRESET button.
Only the selected item’s setting is reset to the factory-set value.
PRESET
G1000S 26-33.EN 98.9.21, 9:53 AM30