JVC GD-42X1 Computer Monitor User Manual


 
42
Troubleshooting
The following are not malfunctions.
This LCD display is built with very high precision technology; however,
be aware that a few pixels may be missing or constantly lit.
When a still image is displayed for a long time, it may remain
indistinctly on the screen after the picture has changed. The remaining
picture will disappear after a while.
The following symptoms are problems only when pictures or sounds
are not played back normally.
A slight electric shock occurs when you touch the monitor.
The top and/or rear panel of the monitor becomes hot.
The monitor emits a cracking noise.
The monitor emits a mechanical noise.
If the monitor does not operate normally, perform the following to
reset the monitor.
Turn off the power switch on the rear of the monitor, and turn it on again.
Unplug the monitor from the wall outlet, and plug it in again.
Cannot turn on the monitor.
Connect the power cord properly. ( page 10)
Turn on the power switch. ( page 10)
The remote control does not work.
Insert the batteries in the correct direction. ( page 05)
Replace the batteries with new ones.
Aim the remote control to the remote sensor on the monitor. ( page
11)
The effective range of the remote control is about seven meters (23 feet).
Get closer to the monitor.
Remove any obstruction between the remote control and the monitor.
No picture from a connected device.
Select the correct input on the monitor.
Connect the external device properly.
Turn on the external device and start playback.