05
Installation
Inserting batteries into the remote control
When replacing the batteries
To avoid short-circuit, place the minus end of the batteries first.
● Batteries shall not be exposed to excessive heat such as direct sunshine, fire or
the like.
● Read the precautions on the battery.
● The batteries last about 6 to 12 months on regular usage.
● The included batteries are supplied for operation check and may last shorter.
Attaching and connecting the speaker unit
Attach the supplied speaker unit under the monitor using the supplied
screws.
● Refer to the startup sheet for details.
● You can also connect speakers other than the supplied one. In this case, set
“PEQ” to “Off”. (➔ page 28)
Impedance: 8 Ω or larger
Rated input power: 10 W or larger
Installation
Install the unit properly referring to the cautions from pages ii to vii.
● Do not hold the speaker unit when carrying the monitor. Hold the stand base
and the upper part of the monitor by two or more people.
Speaker unit (supplied)
Screws (supplied)