Filter
Top Products
12
Basic Controls
R - STANDBY
G POWER ON
INPUT
–
VOL
+
Volume Adjustment
Press the Volume Up “+”
or Down “–” button to
increase or decrease the
sound volume level.
INPUT button
(AV(S Video), Component/RGB and
PC Mode Selection)
Press
the “INPUT” button to select AV
(S Video),
Component
/RGB and PC
input signal modes sequentially.
(see page 15)
Power Indicator
The Power Indicator will light.
•
Power-OFF...Indicator not illuminated
(The unit will still consume some power as
long as the power cord is still inserted into
the wall outlet.)
•
Stand-by
....Red
•
Power-ON .....Green
PC button
Press the “PC” mode selection button to select
the PC mode.
This button is used to switch directly to PC mode.
Stand-by (ON/OFF) button
The Plasma Display must first be plugged into the wall outlet
and turnded on at the power switch (see page 14).
Press this button to turn the Plasma Display On, from Stanby mode.
Press it again to turn the Plasma Display Off to Stanby mode.
N button
(see page 21, 22, 24, 25)
PICTURE button
(see page 24)
PICTURE POS./SIZE button
(see page 20)
Main Power On/Off Switch
Status button
Press the “Status” button to display the current system status.
1 AV(S Video), Component/RGB, PC mode
2 Aspect mode (see page 18)
3 Off timer
The off timer indicator is displayed only when the off timer has
been set.
Off timer 90
2
3
1
AV
4:3