EN 39
If
Picture data cannot
be transmitted
through the DV
connection
Picture blurred
when printed from
the camcorder with
the DV connector
Picture data cannot
be transmitted
through IrDA
reception
ⅷ Printer is in DV mode.
Ⅵ
Press IrDA/DV button to light the DV lamp.
ⅷ Cable is in correct connection.
Ⅵ
Make sure of proper connection.
ⅷ Picture is recorded on the DV tape.
Ⅵ
Use a tape with picture data recorded.
ⅷ Camcorder with the DV connector is in Still
Picture mode.
Ⅵ
When installing a picture from the camcorder by
the DV connector to the printer, set the camcorder
with the DV connector in Still Picture.
ⅷ Printer is in IrDA mode.
Ⅵ
Press IrDA/DV button to light the IrDA lamp.
ⅷ Picture data is being transmitted at a correct
distance and angle.
Ⅵ
Aim the transmitter right in front of the IrDA sensor
of printer and transmit within an approx. 50 cm
distance. Data communications may be difficult at
a too close or too remote distance depending on
the machines in use.
10
16
16
11
18
PRINTER SECTION
Reference
pages
Check to see if