JVC KS-PD100 Network Card User Manual


 
11
Selecting playback modes*
2
Repeat play*
3
: After pressing MODE, press 2
repeatedly to select a desired repeat mode.
Track: Functions the same as “Repeat Mode
One” of the D. player.
Disc: Functions the same as “Repeat Mode
All” of the D. player.
To cancel, press MODE, then press 6.
Random play*
3
: After pressing MODE, press
3 repeatedly to select All or MAG, so that
“Random Play” is activated.
To cancel, press MODE, then press 6.
*
1
The menu selecting mode will be canceled;
– If no operations are done for about 5 seconds.
– When you confirm the selection of a track.
*
2
For the receivers which show “CD-CH (CD-Changer)”
when the D. player is selected as the source, you can
use only one of the playback modes at the same time.
*
3
While any playback mode is selected, the
corresponding indicator lights up on the display of
the receiver.
Basic operation
To select a track:
Turn the control dial clockwise to go to the
next tracks.
Turn the control dial counterclockwise to go
to the beginning of the current track and the
previous tracks.
To fast-forward or reverse a track:
• After pressing MODE, press and hold 4 to
fast-forward.
• After pressing MODE, press and hold 1 to
reverse.
To stop or start playback:
After pressing OK, turn the control dial
counterclockwise to select stop or resume.
To scroll the display information:
Press and hold DISP.
To change the display information:
Press DISP.
Selecting a track from the Top Menu
1 After pressing OK, turn the control dial
clockwise to enter the Top Menu.*
1
2 Press OK.
3 Turn the control dial to select an item.
4 After pressing OK, turn the control dial
counterclockwise to confirm the selection.
When the selected item has a next layer, you
will enter the layer. To move back to the
previous layer, press OK, then turn the control
dial clockwise.
5 Repeat steps 2 to 4 until the desired track is
confirmed.
You can also skip 10 items at a time. After
pressing MODE, press 4 to skip next 10
items or 1 to skip previous 10 items.