Filter
Top Products
14
Operations from the remote controller
• From the remote controller, playback mode selection is not available. Perform the operation on
the control panel to select a playback mode.
You can control the D. player using the remote controller supplied with your receiver.
Examples:
How the buttons on the remote controller work as the D. player’s controls
• The illustrations of RM-RK300 are used as examples.
Basic operation
To select a track:
• Press ¢ (or 3) to go to the next tracks.
• Press 4 (or 2) to go to the beginning of the
current track and the previous tracks.
To fast-forward or reverse a track:
• Press and hold ¢ (or 3) to fast-forward.
• Press and hold 4 (or 2) to reverse.
To stop or start playback: Press ∞.
Each time you press the button, the playback
stops and resumes alternately.
Selecting a track from the Top Menu
1 Press 5 to enter the Top Menu.*
2 Press ¢/4 (or 3/2) to select an item,
then press ∞ to confirm the selection.
When the selected item has a next layer, you
will enter the layer. Repeat the procedure until
the desired track is confirmed.
• You can skip 10 items at a time by pressing
and holding ¢/4 (or 3/2).
• To move back to the previous layer, press 5.
* The menu selecting mode will be canceled;
– If no operations are done for about 5 seconds.
– When you confirm the selection of a track.
During playback When selecting a track from the Top Menu
37 (Play/Stop)
(Enters the Top Menu)
ENTER (Confirms the selection)
(Moves back to the previous layer)
RM-RK230RM-RK300RM-RK50
∞ (Selects the next
items)
5 (Selects the
previous items)
32