Filter
Top Products
54
What to do when these messages are displayed
When the “Lamp time” reaches 1000 hours
[ A message indicating “1000h” appears on the projected screen.
• Press [EXIT] button to delete the message.
At the moment when the accumulated lamp time reaches 1900 hours, a
“Lamp replacement” message will be displayed.
In addition, when the accumulated lamp time reaches between 1900 hours
to 2000 hours, the “Lamp replacement” message will be displayed each
time the projector is turned on.
● The message can be cleared by pressing the [EXIT] button or dis-
playing the menu.
[ Get ready a new lamp (lamp unit) in advance or replace as soon as
possible.
The word “Warning” appears and blinks when the accumulated lamp time
reaches 2000 hours.
The message can be cleared by pressing the [EXIT] button. However, the
same message will re-appear every hour.
Once the projector is turned off, it cannot be turned on again if the accumu-
lated lamp time has exceeded 2000 hours.
When the accumulated lamp time reaches 2010 hours, the projector shuts
down and cannot be turned on again.
[ Replace the light-source lamp and reset the lamp time.
(☞ page 47, 48, 49)
Message Cause (Contents)
Note
• The message display language corresponds to the menu language
setting. This is set to [English] when the projector is bought. The dis-
play language can be selected from among 8 languages. (☞ page 39)
However, the input mode ([PC1], [PC2], [PC3], [Y/C], [VIDEO]) and
button indications ([FREEZE], [D.ZOOM], [EXIT]) are only displayed in
English irrespective of the display language setting.
1000h
EXIT
Lamp replacement
EXIT
Lamp replacement
EXIT
Warning