Filter
Top Products
P14
PC
Basic Connection Example
Notes:
Before connecting your system, make sure that all devices are turned off.
The illustration shows some examples of different connections. Terminal connections may differ depending on
the devices. Be sure to refer to the manuals provided with the devices.
Each pair of input (IN) and output (OUT) terminals are bridge-connected
If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other
cables to the bridged output (OUT) terminal as this will cause the terminating resistance switch to open (auto
terminate function).
When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate
video components.(For example, if both terminals are connected to the same VCR, resonance may occur except
during playback. This is caused by the same video signal “looping” between the VCRs, and is not a malfunction.)
The ASPECT or INPUT A/B settings can be controlled via the ASPECT or INPUT jack in the REMOTE terminal.
When using REMOTE terminal, set REMOTE function ON . See “SYSTEM SETTING menu “ on
page 11.