Filter
Top Products
(No.XE003)1-11
SECTION 5
TROUBLESHOOTING
5.1 Preinstallation procedure
No data including Windows XP has been recorded in service parts HDD. It is necessary to put data in HDD[Preinstall] after
HDD is replaced.
The following materials are needed
• a disc for installing HD Image
Procedure
(1) Turn the power of the main unit off.
(2) Eject the tray by inserting a pin into the hole on the fitting. Refer to [Removing the fitting] in Disassembly section.
(3) Set the HD image installation disc and then close the tray.
(4) Shortly after pressing the power button, "Press any key to continue...." is displayed in the bottom of the screen. Press any key.
(5) "Power Quest Image Center" will run to start the preinstallation.
(6) "Finish Q:\>" is displayed when the preinstallation is completed. Remove the disc by pushing the EJECT button on the fitting.
(7) Push the power button to turn OFF.
• What is Power Quest Image Center ?
Operation of data input by using a software Image Center made by Power Quest.